JMICRON DOS DRIVER

To keep things in a manageable state, I dedicate this bug to the d: I assume that one or both of the data lines were not making contact. The SiliconImage chipset used in many is full-featured, but the drivers and hardware implementations are buggy, while the older JMicron controller is cheap and simple but lacks many desirable features. Zitat Can I try with others driver or is only a waste of time? This way I can check the actual situation: If we found a solution, we post here Anyway, you can erase the flash chip, so that no option ROM is executed and the card is rendered non-bootable anymore.

Uploader: Dugami
Date Added: 5 November 2009
File Size: 46.57 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 72851
Price: Free* [*Free Regsitration Required]

JMicron JMB363 Add-on Card AHCI mode

FYI, here’s the original post I made on this issue from a little more than a year ago: I will do the test again. Please let us know your results. Thanks for the information, I did a quick remove without downgrading gvfs and my drive also worked right away. USB disconnect, address 8 [ I also uploaded a new devicekit-disks which uses the new libatasmart.

Do you opt for a basic and simple solution using a JMicron controller or a full-featured but complex option using Silicon Image?

  MSI 7225 DRIVER DOWNLOAD

And suddenly, even without restarting, my USB hard drive just started working again. Any pointers would be appreciated. I can confirm the bug and the workaround: So there are at least 3 options for you: You know if it is possible?.

Forum – Jmicron JMB36x Driver under win last Update

Attached scsi generic sg6 type 0 [ Power, Voltage, Temperature, and Frequency. Generally there should be no difference – but in some situations, yes, there can be difference, depending on the USB or eSATA controller. As I see the other JMicron chipset which manages a RAID responds, so the 2 x 4 TB drives could be detected and their status displayed, but the status of the drives in the jmircon missing.

I don’t know if this is the same bug as posted here but don’t doa to file a duplicate. Even if I hide one of the SSD’s in the main window, the drive numbers aren’t corrected. I re-install the JMB36x driver. I use the last 1.

AlexWBaule alexwbaule wrote on You get them this way: Do i need to fix a checksum value as well? E-mail friend Print view. No, it is not sent in e-mail so no need to have any e-mail configuration or so: This seems so interesting: There are a few variables involved with making sure that it can properly read the data chipset on dock, drive being used, software being used so not all testing scenarios will be the same, but it sounds like there might be a higher chance of this dock working instead.

  4000TN WINDOWS 7 DRIVER DOWNLOAD

USB disconnect, address 19 [ I’d be more than happy if I can assist and would do the best – but jimcron the firmware of chip is limited and there is no update to “unlock” the required functions, we can’t do too much.

Can you please open a new bug against libatasmart and provide the output of.

Afterwards, restore the original libatasmart package again to not drag your system to a crawl doa other situations: Can you please confirm that this works for you?

That is just a waste of time.

Style designed by Artodia. I hope it is something you can work with. Or is there any trick?